Non Recoverable Tie Rod with Welded Plate as Water Stop for
Waterproof Wall
The demand for waterproof walls always means an extra work and
needs special care when installing and removing of the formwork
anchors with water stops to tighten double side formwork elements.
Non recoverable tie bar with welded intermediate sheet, available
for tie rods Ø 15.0 / 20.0 and 26.5 mm
The advantage of this method is that after finishing the works no
hollow space remains in the concrete, in which the water can be
collected.
The tie bar will be concreted without a wrapping plastic tube in
the middle of the wall as a non recoverable part.
To prevent the additional water circulation, a square sheet 120 x
120 mm is welded at center of the tie rod. The non recoverable tie
rod will be completed with steel cones as couplers on both sides
and extended with the usual tie anchors.
After striking of the formwork, the cones will be removed. The use
of the plastic conical sleeve will ease the removing.
| Part Name | Specification | Weight (kg) | Remark |
Tie-rod
| D15 D20 | 1.52 kg/m 2.71 kg/m | L=6m; Special length available upon request. |
Wing nut
| D15 D20 | 0.35 0.70 | For tie-rod D15 / D20 |
Super plate
| D15 | 1.28 | Used in case of tie-rod and formwork panels are not vertical. |
3-lug wing nut
| D15 D20 | 0.97 0.78 | For tie-rod D15; For tie-rod D20 |
Waling plate
| 120 x 120 x 6, Φ19 120 x 120 x 8, Φ19 | 0.65 0.85 | For tie-rod and nut D15; galvanized |
Water stopper
| D15 D20 | 0.55 0.72 | Used in water resistant wall; With tie-rod D15 / D20 |
Anchor plate
| D20 | 0.95 | Embedded in concrete as lost part |
Packing:
1. Generally, the total net weight of loaded container is 22 tons
to 26 tons, which need be confirmed before loading.
2. Different packages are used for different products:
---bundles: timber beam, steel props, tie rod, etc.
---pallet: small parts will be put in bags and then on pallets.
---wooden cases: it is available on customer's request.
---bulk: some irregular goods will be loaded in bulk in container.
Delivery:
1. Production: For full container, normally we need 20-30 days
after receive customer's down payment.
2. Transportation: It depends on the destination charge port.
3. Negotiation is needed for special requirements.
Who we are:
HORIZON FORMWORK is a professional formwork solution provider for
years, supplying: Formwork systems, scaffolding systems and related
accessories, which are widely used in commercial, residential and
infrastructural projects.
What we offer:
Wall formwork, column formwork, climbing system, table formwork,
flexible slab formwork, frame scaffolding system, ringlock
scaffolding system, cuplock system, form-tie system, etc.
On-site supervising support is available on request.
Why us:
With 10 years of experience, we know exactly what you need;
Strict quality control in raw material selection, production line,
and pre-packing, which ensures the reliable product quality as per
customer's request.
Prompt action on customer's requirments.
We are not only providing excellent products, but also offering a
comprehensive and complete concrete formwork and scaffolding
solution to clients.
HORIZON FORMWORK, your reliable formwork partner!
